Standard Cast Alloys

Standard Alloys Poured

Cast Alloy	Similar Wrought Designation	Specification	UNS No.	C	Cr	Ni	Mo	Cu	Fe	Cb	Other	Tensile (ksi)	Yield (ksi)	Elong
CA6NM	415	ASTM-A743, A487	J91540	0.06	11.5-14.0	3.5-4.5	.4-1.0	-	BAL	-	-	110	80	17%
CA15	410	ASTM-A217,A743	J91150	0.15	11.5-14.0	1	0.5	0.5	BAL	-	-	90	65	18%
CB7Cu-1	17-4 PH	ASTM-A747, AMS-5398C	J92180	0.06	15.5-17.7	3.6-4.6	-	2.5-3.2	BAL	.15-.35	-	135 H1100 Condition	100	9%
CF3	304L	ASTM-A351, A743, A744	J92500	0.03	17.0-21.0	8.0-12.0	0.5	-	BAL	-	-	70	30	35%
CF3MN	316LN	ASTM-A743,A351	J92804	0.03	17.0-21.0	9.0-13.0	2.0-3.0	-	BAL	-	N- 0.10-0.20	75	37	35%
CF3M	316L	ASTM-A351,A743, A744	J92800	0.03	17.0-21.0	9.0-13.0	2.0-3.0	-	BAL	-	-	70	30	30%
CF8	304	ASTM-A351, A743, A744	J92600	0.08	18.0-21.0	8.0-11.0	0.5	-	BAL	-	-	70	30	35%
CF8C	347	ASTM-A351, A743, A744	J92710	0.08	18.0-21.0	9.0-12.0	0.5	-	BAL	8xC-1.0	-	70	30	30%
CF8M	316	ASTM-A351, A743, A744	J92900	0.08	18.0-21.0	9.0-12.0	2.0-3.0	-	BAL	-	-	70	30	30%
CG3M	317L	ASTM-A351, A743 , A744	J92999	0.03	18.0-21.0	9.0-13.0	3.0-4.0	-	BAL	-	-	75	35	25%
CG8M	317	ASTM-A351, A743 , A744	J93000	0.08	18.0-21.0	9.0-13.0	3.0-4.0	-	BAL	-	-	75	35	25%
CN7M	Alloy 20	ASTM-A351,A743, A744	N08007	0.07	19.0-22.0	27.5-30.5	2.0-3.0	3.0-4.0	BAL	-	-	62	25	35%
CN2MCuN	904L		N08904	0.02	19.0-23.0	23.0-28.0	4.0-5.0	1.0-2.0	BAL	-	-	65	28	35%
CK3MCuN	Avesta 254-SMO	ASTM-A351, A743, A744	J93254	0.025	19.5-20.5	17.5-19.5	6.00-7.00	0.50-1.00	BAL	-	N 0.18-0.24	80	38	35%
CN3MN	AL6XN	ASTM-A351, A743, A744	J94651	0.030	20.0-22.0	23.5-25.5	6.0-7.0	0.75	BAL	-	N 0.18-1.26	80	38	35%
CX2MW	Hastelloy C-22	ASTM A494	N26022	0.02	20.0-22.5	BAL	12.5-14.5	-	2.0-6.0	-	W-2.5-3.5	80	45	30%
CW2M	Hastelloy C4C	ASTM-A494, A990	N26455	0.02	15.0-17.5	BAL	15.0-17.5	-	2	-	-	72	40	20%
CW6M	Hastelloy C Modified	ASTM-A494	N30107	0.07	17.0-20.0	BAL	17.0-20.0	-	3	-	-	72	40	25%
CW6MC	Inconel 625	ASTM-A494, MIL-C-24615	N26625	0.06	20.0-23.0	BAL	8.0-10.0	-	5	3.15-4.5	-	70	40	25%
CW12MW	Hastelloy C	ASTM-A494	N30002	0.12	15.5-17.5	BAL	16.0-18.0	-	4.5-7.5	-	W-3.75-5.25,V-.20-.40	72	40	4%
CW12MW	Hastelloy C-276	ASTM-A494	N30002	0.02	15.5-17.5	BAL	16.0-18.0	-	4.5-7.5	-	W-3.75-5.25,V-.20-.40	72	40	4%
CY40	Inconel 600	ASTM-A494	N06040	0.4	14.0-17.0	BAL	-	-	11	-	-	70	28	30%
CZ100	Cast Nickel	ASTM-A494	N02100	1	-	95.0 min.	-	1.25	3	-	-	50	18	10%
N7M	Hastelloy B Modified	ASTM-A494	N30007	0.07	1	BAL	30.0-33.0	-	3	-	-	76	40	20%
N12MV	Hastelloy B	ASTM-A494	N30012	0.12	1	BAL	26.0-30.0	-	4.0-6.0	-	-	76	40	6%
M35-1	Monel 400	ASTM-A494, A990	N24135	0.35	-	BAL	-	26.0-33.0	3.5	0.5	Si 1.25	65	25	25%
M35-2	Monel	ASTM-A494	N04020	0.35	-	BAL	-	26.0-33.0	3.5	-	Si 2.0	65	30	25%
M35-B / M30H	H-Monel	ASTM-A494; QQ-N-288 Comp B	N24030	0.3	-	BAL	-	27.0-33.0	2.5	-	Si 2.7-3.9	700	60	10%
M35-C	Monel	QQ-N-288 Comp C	N24025	0.2	-	BAL	-	27.0-31.0	2.5	-	Si 3.3-3.7	120	80	10%
M35-D / M25S	S-Monel	ASTM A494, QQ-N-288 Comp D	N24025	0.25	-	BAL	-	27.0-31.0	2.5	-	Si 3.5-4.5	-	-	-
M30C / M35W	Weldable Monel	ASTM-A494, QQ-N-288 Comp E	N24130	0.3	-	BAL	-	26.0-33.0	3.5	-	Si 1.0-2.0, Cb 1.0-3.0	65	32.5	25%
952	Al Bronze Grade A	ASTM-B148	C95200	-	-	-	-	86.0 min	2.5-4.0	-	Al 8.5-9.5	65	25	20%
954	Aluminum-Bronze	ASTM-B148	C95400	-	-	1.5 max	-	83.0 min	3.0-5.0	-	Al 10.0-11.5	75	30	12%
955	Aluminum-Bronze	ASTM-B148	C95500	-	-	3.0-5.5	-	78.0 min	3.0-5.0	-	Al 10.0-11.5	90	40	6%
958	Ni-Al-Brz	ASTM-B148	C95800	-	-	4.0-5.0	-	79.0 Min	3.0-4.5	-	Al 8.5-9.5 Pb .03 max	85	35	15%
964	70*30 Copper-Nickel	ASTM-B369	C96400	0.15	-	28.0-32.0	-	BAL	.25-1.5	0.5-1.5	Mn 1.5	60	32	20%
CD4MCuN	Duplex Grade 1B	ASTM-A890,A995	J93372	0.04	24.5-26.5	4.75-6.0	1.75-2.25	2.75-3.25	BAL	-	N 0.10-0.25	100	70	16%
CD3MCuN	Duplex Grade 1C	ASTM-A890	J93373	0.03	24-26.7	5.6-6.7	2.9-3.8	1.4-1.9	BAL	-	N 0.22-0.33	100	65	25%
CE8MN	Duplex Grade 2A	ASTM-A351, A890, A995	J93345	0.08	22.5-25.5	8.0-11.0	3.00-4.50	-	BAL	-	N 0.10-0.30	95	65	25%
CD6MN	Duplex Grade 3A	ASTM-A890, A995	J93371	0.06	24.0-27.0	4.0-6.0	1.75-2.50	-	BAL	-	N 0.10-0.25	95	65	25%
CD3MN	Duplex Grade 4A	ASTM-A890, A995	J92205	0.03	21.0-23.5	4.5-6.5	2.5-3.5	1.00 max	BAL	-	N 0.10-0.30	90	60	25%
CE3MN	Duplex Grade 5A	ASTM-A890, A995	J93404	0.03	24.0-26.0	6.0-8.0	4.0-5.0	-	BAL	-	N 0.10-0.03	100	75	18%
CD3MWCuN	Grade 6A Zeron100	ASTM-A890, A995	J93380	0.03	24.0-26.0	6.5-8.5	3.0-4.0	0.5-1.0	BAL	-	N 0.02-0.03 W 0.5-1.0	100	65	25%
HH	ASTM-A297	ASTM-A297	J93503	0.20-0.50	24.0-28.0	11.0-14.0	0.5	1	BAL	-	-	75	35	10%
HK	ASTM-A297	ASTM-A297	J94224	0.20-0.60	24.0-28.0	18.0-22.0	0.5	1	BAL	-	-	65	35	10%
HN	HI-35	ASTM-A297	J94213	0.20-0.50	19.0-23.0	23.0-27.0	0.5	1	BAL	-	-	63	-	8%
HT	330 (15-35)	ASTM-A297	N08605	0.35-0.75	15.0-19.0	33.0-37.0	0.5	1	BAL	-	-	65	-	4%
HU	(19-39)	ASTM-A297	N08004	0.35-0.75	17.0-21.0	37.0-41.0	0.5	1	BAL	-	-	65	-	4%
HX	ACI HX	ASTM-A297	N06006	0.35-0.75	15.0-19.0	64.0-68.0	0.5	1	BAL	-	-	60	-	-
WCA	Carbon Steel	ASTM-A216	J02502	0.25	0.5	0.5	0.2	0.3	BAL	-	-	60-85	30	24%
WCB	Carbon Steel	ASTM-A216	J03002	0.3	0.5	0.5	0.2	0.3	BAL	-	-	70-95	36	22%
WCC	Carbon Steel	ASTM-A216	J02503	0.25	0.5	0.5	0.2	0.3	BAL	-	-	70-95	40	22%
LCB	Carbon Steel	ASTM-A352	J03003	0.3	0.5	0.5	0.2	0.3	BAL	-	-	65	35	24%
LCC	Carbon Steel	ASTM-A352	J02505	0.25	0.5	0.5	0.2	0.3	BAL	-	-	70	40	22%
LC2		ASTM-A352	J22500	0.25	-	2.00-3.00	0.45-0.65	-	BAL	-	-	70.0-95.0	40.0	24%
LC3		ASTM-A352	J31550	0.15	-	3.00-4.00	-	-	BAL	-	-	70.0-95.0	40.0	24%
WC6		ASTM-A217	J12072	0.05-0.20	1.00-1.50	-	0.45-0.65	0.50	BAL	-	-	70-95	40	20%
WC9		ASTM-A217	J21890	0.05-0.18	2.00-2.75	-	0.90-1.20	0.50	BAL	-	-	70-95	40	20%
C5		ASTM-A217	J42045	0.20	4.00-6.50	-	0.45-0.65	0.50	BAL	-	-	90-115	60	18%
C12		ASTM-A217	J82090	0.20	8.00-10.00	-	0.90-1.20	0.50	BAL	-	-	90-115	60	18%
C12A	Grade 91	ASTM-A217	J84090	0.08-0.12	8.0-9.5	0.40	0.85-1.05	-	BAL	0.060-0.10	N 0.030-0.070, V 0.18-0.25	85-110	60	18%
SC8625		ASTM A487, A148		0.30	0.40-0.80	0.40-0.80	0.15-0.30	0.50	BAL	-	-	105-130	85	17%

1. 254SMO is a registered trademark of Outokumpu.
2. Alloy 20 is a registered trademark of Carpenter Technology Corporation.
3. Hastelloy is a registered trademark of Haynes International.
4. AL6XN is a registered trademark of Allegheny Ludlum Incorporated.
5. Zeron 100 is a registered trademark of Weir International.
6. "Similar Wrought Designation". Wrought alloys have chemistries, mechanical properties or corrosion properties that may be different than the cast alloy. Wrought names are given as a reference for commonly accepted equivalent materials.
NOTE: Virtually any alloy specification can be handled by our versatile melting equipment. Many unlisted alloys can be cast.
Chemistries are maximums unless ranges are given. Quotations gladly furnished on request

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN10204 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3, NADCAP Certified in accordance with SAE Aerospace Standards

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
MOBILE No. 0091- 9820292499
EMAIL - rolexmetal@vsnl.net

ROLEX ALLOYS INTERNATIONAL
( High Nickel Alloy & Super Alloy Materials )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
email - rolexmetal@vsnl.net
website : www.rolexalloys.com

CHAIRMAN - chairman@rolexalloys.com
DIRECTOR MANAGING - managingdirector@rolexalloys.com
DIRECTOR TECHNICAL - technicaldirector@rolexalloys.com
INTERNATIONAL SALES - salesinternational@rolexalloys.com
DOMESTIC SALES - salesdomestic@rolexalloys.com
INFORMATION GENERAL - info@rolexalloys.com
GENERAL SALES - sales@rolexalloys.com
SERVICE - service@rolexalloys.com
RECRUITMENT - career@rolexalloys.com
WEBMASTER - webmaster@rolexalloys.com

UNS K93600 (Invar 36 ®, Nilo 36®, Pernifer® 36) , UNS K94200 (Invar 42®, Nilo 42 ® , UNS K92890 (Vascomax 250 ®, Maraging C250), UNS K93120 (Vascomax® 300, Maraging C300), Maraging C350 (Vascomax ® 350) , UNS N04400 (Alloy 400, Monel 400®, Nickelvac® 400, Nicorros® 400) , UNS N06600 ( Inconel 600®, Nickelvac® 600, Ferrochronin® 600) , UNS N06601 ( Inconel 601®, Pyromet® 601, Nicrofer® 601) , UNS N06617 (Inconel 617 ®, Nicrofer 5520®) , UNS N06625 (Inconel 625 ®, Chronin® 625, Altemp® 625, Haynes® 625, Nickelvac® 625, Nicrofer® 6020) , UNS N07718 (Inconel 718®, Nicrofer® 5219 Allvac® 718, Haynes® 718, Altemp® 718) , UNS N07750 ( Inconel X750®, Haynes X750®, Pyromet® X750, Nickelvac® X750, Nicrofer® 7016) , UNS N08800, N08810, N08811 (Incoloy 800H ®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220) ,UNS N08825 (Incoloy 825 ®, Nickelvac® 825, Nicrofer® 4221), UNS N10276 ( Hastelloy C276®, Nickelvac® HC-276, Inconel® C276, Nicrofer® 5716) , UNS N06022 (Hastelloy C22 ®, Inconel® 22, Nicrofer® 5621), UNS N10665 ( Hastelloy B2®, Nimofer® 6928) , UNS N06002 (Hastelloy X ®, Nickelvac® HX, Nicrofer® 4722, Altemp® HX, Inconel® HX), UNS R30035 ( MP35N®, PRP® 35N, Pyromet® 35N) , UNS R30159 (MP159 ®) Multimet ®, Custom 450 ® , Custom 455 ® , Duplex 2205, Super Duplex, UNS N02200 (Nickel 200. Nickel 99.2), UNS N02201 (Nickel 201, LC Nickel 99.2), UNS N07041 (Rene 41 ® , Allvac Rene® 41, Haynes® R-41, Udimet® R41) , UNS R30605 (Alloy L-605, Haynes 25 ®, Nickelvac® L-605, Udimet® L-605 Conicro® 5010) , UNS N07001 (Waspalloy ®, Allvac® Waspalloy®) , UNS N08330 (Alloy 330, RA330 ®, Incoloy® 330, Nicrofer® 3718), UNS N30188 (Haynes® 188, Udimet® 188 Conicro® 4023)